HUAWEI
HUAWEI - MediaTek Devices
MediaTek-powered Huawei devices.
CONNECTION
- CONNECTION
How to Connect Huawei MTK Flash Mode by Testpoint ?
Created: 2023-07-30 16:13:50
- Dissemble device (Cellphone/ Mobile) and find its test-points.
- Connect your device with USB Cable to the PC (Personal Computer) or Laptop.
- Run MTK Module, Select Brand & Model
- Click "BOOT INFO".
- Wait until the booting process is completed.
REMOVE HUAWEI ID
- Remove Huawei ID
How to Huawei MTK Devices Remove Huawei ID by USB ?
Created: 2023-05-25 03:36:41
Huawei MTK Devices Remove Huawei ID
- Run MTK SoC, Select Brand and Model
- Select Huawei Option, Select method "Remove Account" then click Execute
- Connect USB Cable Power off Mode, Wait for operation completed
- Power On the phone.
- Check IMEI if NULL then Continues the process if IMEI is okay then Done!!!!
- Input/put Pattern or pass or pin
- Power off Phone and Connect by Testpoint again
- Select Huawei option, Select Restore OEMinfo, locate auto-backup created, then execute
- Power on phone, if the phone asks patter/pass/pin, just input the one you created in step 5
Note
Huawei MED-XXX, JAT-XXX, DRA-XX, AMN-XXX, MRD-XXX, FRL-XXX, DUA-XXX, AMN-XXX, KSA-XXX
REPAIR IMEI
- REPAIR IMEI
How to IMEI Repair Huawei MTK by Testpoint ?
Created: 2023-05-25 03:42:44
- Disassembly your device for Testpoint
- You can See TestPoints at Hydra Dongle Help Section or at Web Search
- Run MTK SoC, Select Brand and Model
- Go to Repair IMEI Tab and Accept Terms
- Select Huawei IMEI Flash Mode Method
- Fill IMEI Boxes, Click Repair IMEI Button
- Connect USB Cable your device with Testpoint
Info
You can Check Supported Models from Here!
SUPPORTED MODELS
- SUPPORTED MODELS
Huawei MediaTek Device Models
Coming Soon
Device models and support information will be added here.
INSTALLATION GUIDE
- INSTALLATION GUIDE
Huawei MediaTek Installation Steps
Installation Steps
Installation instructions for Huawei MediaTek devices will be provided here.
WRITE FIRMWARE
- WRITE FIRMWARE
How to Write Firmware of Huawei MTK by Testpoint ?
Created: 2023-05-25 04:07:11
- Power off your device (Cellphone / Mobile).
- Connect your device to Flash Mode with the help of test point. (Note: You can find test point folder in Hydra Installation Folder.)
- Run MTK SoC, Select Brand & Model of the device (Cellphone / Mobile).
- Go to Flash Tool tab
- Select "Firmware" Click "Execute".
RESET FRP
- RESET FRP
How to Reset FRP Huawei MTK by Testpoint ?
Created: 2023-05-25 04:07:59
To reset the FRP (Factory Reset Protection) of a Huawei Mediatek device in BROM mode, you can follow the steps below:
- Power off your Huawei device.
- Launch the Hydra Tool Software on your computer.
- Select the MTK SoC option within the software.
- Choose the appropriate brand and model of your Huawei Mediatek device from the available options.
- Tick the checkbox labeled "Factory Reset Protection (FRP)" to indicate that you want to perform an FRP reset.
- Click on the "Execute" button to start the FRP reset process.
- Connect your Huawei Mediatek device to the computer while it is in BROM (Boot ROM) mode. BROM mode is typically activated by pressing specific key combinations on your device or by using a dedicated software tool provided by the manufacturer.
- Once your device is connected in BROM mode, wait patiently for the operation to complete. The software will handle the FRP reset process automatically.
FACTORY RESET [FORMAT]
- FACTORY RESET [FORMAT]
How to Factory Reset [Format] MTK by Flash Mode ?
Created: 2023-07-30 17:57:30
- Power off device
- Run MTK Module, Untick Auto Select Brand and Model, if model not exist leave it as Auto
- Go to Service / Tool Tab
- Tick Wipe / Format Userdata / Factory Reset Option and Click Execute
- Wait for Log Instructions and Connect USB Cable
- Waiting for Until your task completed.
Navigate back to MediaTek devices or All supported devices